FAQ
-
These are diamonds obtained by a person in the laboratory. It was trendy and outlandish when they first hit the market. Everyone talked about their "ethics" and "a threat to natural stones" (not to mention the monstrous amount of energy expended and ubiquitous availability, which led to a sharp decrease in cost). At the moment, their real value is such that they go into the category of costume jewelry with an unreasonable price tag. We do not recommend these stones for purchase, due to the constant decrease in their value.
-
In the classical sense of the term "investment", it is extremely rare to call the purchase of a diamond that way. But if the stone was purchased directly from the cutter, without a chain of intermediaries at a good price, then this purchase can be considered saving money.
-
If we are talking about diamonds, then only GIA certificates. In the professional market, certificates from other laboratories are not accepted. When it comes to colored gemstones, we recommend SSEF, GRS, AGL, Gubelin.
-
White gold is an alloy of gold and nickel or palladium. White gold in its natural state usually has a dull or pale yellow hue. White gold is usually plated with another white metal called rhodium. Rhodium belongs to the platinum family. The rhodium plating wears off over time and needs to be refreshed periodically if you want your piece to look like new. Platinum is a white metal, but unlike gold, it is a homogeneous metal. Platinum is also a denser metal than gold, which means it weighs more in the finished product. Platinum is hypoallergenic, so if you have a reaction to an alloy of gold, then you can opt for it. It is worth noting that platinum is slightly softer than gold, so it picks up scratches faster, but does not lose its whiteness.
-
Yes, the price of diamonds with this property can be reduced by up to 30%. Be careful when buying such stones. And with strong fluorescence, the stone may begin to yield visually. Which diamonds are the most expensive? Pure red and blue diamonds. Their price can exceed 3 million dollars per carat.
-
Pure red and blue diamonds. Their price can exceed 3 million dollars per carat.
-
All gemstones can break if hit hard, and diamonds are no exception (especially sharp cuts). But what is true is that a diamond cannot be scratched by anything other than other diamonds, so consider storing your jewelry in separate boxes.
-
The unequivocal advice is to contact a gemologist or a laboratory, there are no universal ways to check at home. Moreover, to distinguish the natural origin of the stone from diamonds grown in the laboratory.
-
To ensure your diamond jewelry always looks its best, it is recommended to avoid contact with chemicals, extreme temperatures and overuse. Clean your diamond jewelry regularly with a soft toothbrush and dish soap (great for removing natural plaque on jewelry) and store it in a soft cloth or jewelry box to prevent scratches.
-
Because it is unlikely that you want to get a dull and lifeless diamond; in a diamond, fire, brilliance and radiance are valued, which are only found in diamonds with a good and high-quality cut. Clarity affects these properties only in very dirty stones (I2 or I3 clarity).
-
Diamonds and other precious stones must be shown and talked about only in person. Certificates are not enough. The seller should work with you personally, teach you, help you learn what you like. Diamonds should be examined under different lighting conditions and at 10x magnification. Why do you think diamond dealers buy stones in person? The savings on the trip for the stones are not worth the mistakes we would make if we bought a picture on the Internet. Many gems have beautiful lab reports but don't look as good in real life.